賴景義 - 國立中央大學機械工程學系

關於機械系-師資

賴景義 Lai, Jiing-Yih

教授

辦公室：E4-265
專線電話：03-4267322
校內分機：34322
傳真電話：03-4254501
E-mail：jylai@cc.ncu.edu.tw
實驗室分機：34371

學經歷
Education & Experiences

學歷
美國俄愛俄州立大學機械系博士
美國俄愛俄州立大學機械系碩士
國立成功大學機械系學士

經歷
國立中央大學機械系系主任(2013-2016)
國立中央大學秘書室主任秘書(2011-2013)
國立中央大學機械系副系主任(2010-2011)
國立中央大學研發處副研發長(2004-2007)
國立中央大學研發處研究推動組組長(2003-2004)

EDUCATION
Ph.D., Dept. of Mechanical Engineering, The Ohio State University, USA
M.S., Dept. of Mechanical Engineering, The Ohio State University, USA)
B.S. Dept. of Mechanical Engineering, National Cheng Kung University, Taiwan

EXPERIENCES
2013-2016 Chairman, Department of Mechanical Engineering, National Central University
2011-2013 Secretary General, National Central University
2010-2011 Vice Chairman, Department of Mechanical Engineering, National Central University
2004-2007 Deputy Dean, Office of R&D
2003-2004 Group leader,Division of Research Promotion

教授課程
Courses Taught

研究專長
Research Areas

逆向工程(Reverse engineering)
CADCAM
三次元量測(Precision Measurement)
生醫工程(Biomedical Engineering)

實驗室
Laboratory

CAD自動化研究室 E2-212
三次元量測實驗室 E4-B52

論文著作 Publications

題目 Title	作者姓名	期刊名稱	出版年份	期別及起訖頁數	期刊種類
Deep learning and SURF for automated classification and detection of calcaneus fractures in CT images	Y. D. Pranata, K. C. Wang, J. C. Wang, Irwansyah Idram, J. Y. Lai, J. W. Liu and I. H. Hsieh	Computer Methods and Programs in Biomedicine	2019	Vol. 171, pp. 27-37	SCI
Repositioning bone fragments using registration of paired-points and assisted–constraints in virtual bone reduction surgery	Irwansyah Idram, J. Y. Lai and P. Y. Lee	Journal of Biomedical Engineering	2019	Vol. 31, No. 3, 1950021	SCI
Automatic Recognition and Suppression of Holes on Mold Bases for Finite Element Applications	P. P. Song, J. Y. Lai, Y. C. Tsai, and C. H. Hsu	Engineering with Computers	2019	Vol. 35, No. 3, pp. 925-944	SCI
Development of Mesh-Defect Removal Algorithm to Enhance the Fitting of 3D-Printed Parts for Comminuted Bone Fractures	Irwansyah, R. D. Bintara, J. Y. Lai, T. Essomba and P. Y. Lee	Journal of Medical and Biological Engineering	2019	Vol. 39, No. 6, pp. 855-873	SCI
Kinematic analysis and evaluation of a hybrid mechanism for computer assisted bone reduction surgery	S. N. Phu, T. Essomba, I. Idram and J. Y. Lai	Mechanical Sciences	2019	Vol. 10, pp. pp. 589-604	SCI
Automatic and Improved Camera Information Processing for a 3D Photo-Modelling System	T. C. Wu , J. Y. Lai, D. W. Wang , C. Y. Liao and J. Y. Lee	Computer-Aided Design and Applications	2020	Vol. 17, No. 1, pp. 124-137	EI
Recognition and Simplification of Holes in CAD Models of an Injection Mold for Mold Flow Analysis	J. Y. Lai, P. P. Song, C. H. Hsu and Y. C. Tsai	Computer-Aided Design and Applications	2020	Vol. 17, No. 1, pp. 88-107	EI
Effect of fractal parameters on optical properties of cold rolled aluminum alloy strips with induced surface deflection: simulations and experimental correlations	M. A. Mahmood, T. Y. Tsai, Y. J. Hwu, W. J. Lin, L. C. Liu, J. Y. Lai, J. W. Pan, W. L. Li and J. F. Lin	Journal of Material Processing Technology	2020	Vol. 279, 116554	SCI
Effects of roll pattern and reduction ratio on optical characteristics of A1008 cold-rolled steel specimens: analytical approach and experimental correlations	M. A. Mahmood, C. F. Han, H. Y. Chu, C. C. Sun, W. H. Wu, W. J. Lin, L. C. Liu, J. Y. Lai, I. N. Mihailescu and J. F. Lin	International Journal of Advanced Manufacturing Technology	2020	Vol. 111, pp. 2001-2020	SCI
Sanders classification of calcaneal fractures in CT images with deep learning and differential data augmentation techniques	N. A. Farda, J. Y. Lai, J. C. Wang, P. Y. Lee, J. W. Liu and I. H. Hsieh	Injury	2021	Vol. 52, No. 3, pp. 616-624	SCI
Recognition and Classification of Protrusion Features on Thin-Wall Parts for Mold Flow Analysis	J. Y. Lai, P. P. Song, A. S. Hsiao, Y. C. Tsai and C. H. Hsu	Engineering with Computers	2021	Vol. 37, No. 2, pp. 833-854	SCI
Design Analysis and Modification of Ribs and Tubes on Thin-Wall Parts for Mold Flow Analysis	J. Y. Lai, Z. W. Zhang, P. P. Song, C. H. Hsu and Y. C. Tsai	Computer-Aided Design and Applications	2021	Vol. 18, No. 3, pp. 584-559	EI
Hybrid mesh generation for the thin shell of thin-shell plastic parts for mold flow analysis	1. J. Y. Lai, J. W. Wu, P. P. Song, T. Y. Chou, Y. C. Tsai and C. H. Hsu	Engineering with Computers	2021	online	SSCI
A High-Resolution Texture Mapping Technique for 3D Textured Model	J. Y. Lai 1, T. C. Wu, W. Phothong, D. W. Wang, C. Y. Liao and J. Y. Lee	Applied Sciences-Basel	2018	Vol. 8, No. 11, pp. 2228-2250	SCI
Automatic Recognition and Decomposition of Rib Features in Thin-Shell Parts for Mold Flow Analysis	J. Y. Lai, M. H. Wang, P. P. Song, C. H. Hsu, and Y. C. Tsai	Engineering with Computers	2018	Vol. 34, No. 4, pp. 801-820	SCI
Generation and Quality Improvement of 3D Models from Silhouettes of 2D Images	P. Watchama, T. C. Wu, C. Y. Yu, J. Y. Lai, Douglas W. Wang and C. Y. Liao	Journal of the Chinese Institute of Engineers	2018	Vol. 41, No. 3, pp. 216-228	SCI
Quality Improvement of 3D Models Reconstructed from Silhouettes of Multiple Images	W. Phothong, T.C. Wu, J.Y. Lai, C. Y. Yu, D.W. Wang, C.Y. Liao	Computer-Aided Design and Applications	2018	Vol. 15, No. 3, pp. 288-299	EI
Editable Texture Map Generation and Optimization Technique for 3D Visualization Presentation	T.C. Wu, J.Y. Lai, W. Phothong, D.W. Wang, C.Y. Liao, J.Y. Lee	Computer-Aided Design and Applications	2018	Vol. 15, No. 3, pp. 378-389	EI
Recognition and Decomposition of Rib Features in Thin-Shell Plastic Parts for Finite Element Analysis	J. Y. Lai, M. H. Wang, P. P. Song, C. H. Hsu, and Y. C. Tsai	Computer-Aided Design and Applications	2017	Vol. 15, No. 2, pp. 264-279.	EI
Small blend suppression from B-rep models in computer-aided engineering analysis	J. Y. Lai, C. Wong, T. T. Huynh, M. H. Wang, C. H. Hsu, Y. C. Tsai and C. Y.Huang,	Journal of Chinese Institute of Engineers,	2016	Vol. 39, No. 6, pp. 735-745. (SCI)
Fast and Accurate Triangular Model Generation for Shape from Silhouette	W. Phothong, T. C. Wu, J. Y. Lai, D. W. Wang, C. Y. Liao and J. Y. Lee,	Computer-Aided Design and Applications,	2016	Vol. 14, No. 4, Pages 436-449. (EI)
Boss Recognition Algorithm and Application to Finite Element Analysis	M. H. Wang, J. Y. Lai, C. H. Hsu, Y. C. Tsai and C. Y. Huang,	Computer-Aided Design and Applications,	2016	Vol. 14, No. 4, Pages 450-463. (EI)
Recognition of Virtual Loops on 3D CAD Models Based on the B-Rep Model	J. Y. Lai, M. H. Wang, Z. W. You, Y. K. Chiu, C. H. Hsu, Y. C. Tsai and C. Y. Huang,	Engineering with Computers,	2016	Vol. 32, No. 4, pp. 593-606.
Improving the Injection Molding of Small Optical Elements by Integrating Reverse Engineering and Mold Flow Analysis	J.Y. Lai, Y.Y. Wen and C.H. Liu,	ARPN Journal of Engineering and Applied Sciences,	2016	Vol. 11, No. 2, pp. 867-872.
On the Development of Virtual Inner Loops for Feature Recognition	M. H. Wang, J. Y. Lai, Y. K. Chiu, C. H. Hsu, Y. C. Tsai, C. Y. Huang	Key Engineering Materials	2015	Vol. 656-657, pp. 761-767
On the Development of Blend Faces and Holes Recognition Algorithm for CAE Applications	J. Y. Lai, Z. W. You, Y. K. Chiu, M. H. Wang, C. H. Hsu, Y. C. Tsai, C. Y. Huang,	Key Engineering Materials	2015	Vols. 656-657, pp. 789-794.
Two-dimensional localization and clearance evaluation of screw rotors	Y.C. Huang, J.Y. Lai, F.Y. Lin and Y.L. Guo	International Journal of Computer Applications in Technology	2010	Vol. 37, No. 1, pp. 74-85.
Automatic Construction of Quadrilateral Network of Curves from Triangular Meshes	C.Y. Huang, J.Y. Lai and K.Y. Lin,	Advances in Engineering Software	2010	Vol. 41, No. 2, pp. 388-400
Semi-Automatic Feature Point Extraction Using One Seed Point	S. H. Hsu and J.Y. Lai	International Journal of Advanced Manufacturing Technology	2010	Vol. 51, No. 1-4, pp. 277- 295
Three-dimensional Localization and Clearance Evaluation of Screw Rotors	Y.C. Huang, J.Y. Lai, F.Y. Lin, and Y.L. Guo	International Journal of Computer Applications in Technology, accepted	2011	(EI)
Efficient Segmentation and Construction of 3D Bone Models in Medical Images	C.Y. Huang, L.J. Luo, P.Y. Lee, J.Y. Lai, W.T. Wang, S.C. Lin	Journal of Medical and Biological Engineering	2011	Vol. 31,No. 6, pp. 375-386
Automatic Model-based Roentgen Stereophotogrammetric Analysis (RSA) of Total Knee Prostheses	C.B. Syu, J.Y. Lai, R.Y. Chang, K.S. Shih, K.J. Chen and S.C. Lin	Journal of Biomechanics	2012	pp. 164-171
Automatic Reconstruction of B-spline Surfaces with Constrained Boundaries	K.Y. Lin, C.Y. Huang, Y.C. Tsai, J.Y. Lai and W.D. Ueng	Computers & Industrial Engineering	2012	pp. 226-244
Virtual 3D Planning of Pelvic Fracture Reduction and Implant Placement	P.Y. Lee, J.Y. Lai,Y.S. Hu, C.Y. Huang, Y.C. Tsai and W.D. Ueng	Biomedical Engineering: Applications, Basis and Communications	2012	pp. 245-262
Meshing Simulation and Clearance Evaluation of Real Screw Rotors	Y.C. Huang, J.Y. Lai, F.Y. Lin and Y.L. Guo	Journal of the Chinese Institute of Engineers	2012	pp. 887-900
Execution Efficiency of Model-based Roentgen Stereophotogrammetric Analysis (RSA) - Simplification and Seamentation of Model Meshes	C.B. Syu, J.Y. Lai, C.Y. Huang, K.S. Shih, K.J. Chen and S.C. Lin	Computer Methods in Biomechanics and Biomedical Engineering	2012	Vol. 15, No.12, pp. 1347-1357. (SCI 1.169)
Computer Assisted Fracture Reduction and Fixation Simulation for Pelvic Fractures	P.Y. Lee, J. Y. Lai, C. Y. Huang, Y. S. Hu and C. L. Feng	Journal of Medical and Biological Engineering	2014	doi:10.5405/jmbe.1605.
Improvement in the clinical practicability of roentgen stereophotogrammetric analysis (RSA) - free from the use of the dual X-ray equipment	K.S. Shih, C.H.Lee, C.B. Syu, J.Y. Lai, K.J. Chen and S.C. Lin	Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine	2012	Vol. 226, NO. 10, pp.766-75
Recognition of Depression and Protrusion Features on B-rep Models Based on Virtual Loops	J. Y. Lai, M .H. Wang, Y. K. Chiu, C. H. Hsu, Y. C. Tsai and C. Y. Huang,	Computer-Aided Design and Applications,	2015	pp. 95-107
B-spline Surface Fitting of Random Points with Constrained Boundary Conditions	K.J. Chen, Y.C. Tsai, J.Y.Lai and W.D.Ueng	International Journal of Computer Applications in Technology	2007	VOL. 30, No. 4, pp. 295-308
An Extended Surface Fitting Algorithm for Random Data	K.J. Chen, J.Y. Lai and W.D. Ueng	Journal of the Chinese Institute of Engineers	2007	Vol 30, No. 5, pp. 863-876
A Sweeping Technique for Surface Reconstruction in Reverse Engineering	J.Y. Lai and KY. Lin	J. of the Chinese Society of Mechanical Engineers	2007	Vol. 28, No. 5, pp. 481-493
Unconstrained and constrained curve fitting for reverse engineering	W.D. Ueng, J.Y. Lai and Y.C. Tsai	International Journal of Advanced Manufacturing Technology	2007	Vol. 33, pp. 1189-1203
On the Development of CMM Inspection Technology for Parts without Regular Features	J.Y. Lai and K.J. Chen	J. of the Chinese Society of Mechanical Engineers	2007	Vol. 28, No. 4, pp. 385-396
A data segmentation technique for triangular meshes in reverse engineering	J.Y. Lai and Y.C. Tsai	J. of the Chinese Society of Mechanical Engineers	2007	Vol. 28, No. 3, pp. 289-3001
On the Development of a Hole Filling Algorithm for Triangular Meshes	J.Y. Lai and S. H. Shu	Journal of the Chinese Institute of Engineers	2007	Vol. 30, No. 5, pp. 877-889
Localization of parts with irregular shape for CMM inspection	J.Y. Lai and K. J. Chen	International Journal of Advanced Manufacturing Technology	2007	Vol. 32, pp. 1188-1200
On the Development of a Parametric Interpolator with Confined Chord error, Feedrate, Acceleration and Jerk	J.Y. Lai, K.Y. Lin, S.J. Tseng and W.D. Ueng	International Journal of Advanced Manufacturing Technology	2008	Vol. 37, pp. 104-121
逆向工程之連續性曲面模型自動化建構	蔡耀震, 黃仲儀, 林冠元, 賴景義, 翁文德	先進工程學刊	2008	Vol. 3, No. 3, pp. 209-215
向工程之誤差限制B-spline曲線建構技術發展	林冠元,賴景義,翁文德,陳國仁	先進工程學刊	2008	Vol 3, No. 4, pp. 269-275
CNC Codes Conversion from Linear and Circular Paths to NURBS Curves	K.Y. Lin, W.D. Ueng and J.Y. Lai	International Journal of Advanced Manufacturing Technology	2008	Vol. 39, pp. 760-773
A fast error comparison method for massive STL data	J.Y. Lai and Y.C. Huang	Advances in Engineering Software	2008	Vol. 39, No. 12, pp. 962-972
以三角網格為基礎之啟發式特徵線搜尋	許聖函,賴景義	先進工程學刊	2009	Vol. 4, No. 1, pp. 1-8.
A NURBS Curve Interpolator with Jerk-limited Trajectory Planning	S.J. Tseng, K.Y. Lin, J.Y. Lai, and W.D. Ueng	Journal of the Chinese Institute of Engineers	2009	Vol. 32, No. 2, pp. 215-228
Development of Automatic Surface Reconstruction Technique in Reverse Engineering	Y.C. Tsai, C.Y. Huang, K.Y. Lin J.Y. Lai and W.D. Ueng	International Journal of Advanced Manufacturing Technology	2009	Vol. 42, No. 1-2, pp. 152-167
Development of Feature Segmentation Algorithms for Quadratic Surfaces	H.C. Lai, Y.H. Chang and J.Y. Lai	Advances in Engineering Software	2009	Vol. 40, pp. 1011-1022
Extraction of Geodesic Feature Lines on Triangular Meshes	S. H. Hsu and J.Y. Lai	International Journal of Advanced Manufacturing Technology	2009	Vol. 42, No. 9-10
A New Registration Method for Three-Dimensional Knee Nearthrosis Model Using Two X-ray Images	J.Y. Lai, W.L. Dai, C.B. Syu, K. S. Shih, W.T. Wang and S.C. Lin	Computer Methods in Biomechanics and Biomedical Engineering	2010	Vol. 13, No. 2, pp. 265-278
A Partial Mesh Replacement Technique for Design Modification in Rapid Prototyping	H.C. Lai and J.Y. Lai	Computers & Industrial Engineering	2010	Vol. 58, No. 3, pp. 468-487
Two-dimensional localization and clearance evaluation of screw rotors	Y.C. Huang, J.Y. Lai, F.Y. Lin and Y.L. Guo	International Journal of Computer Applications in Technology	2010	Vol. 37, No. 1, pp. 74-85
Automatic Construction of Quadrilateral Network of Curves from Triangular Meshes	C.Y. Huang, J.Y. Lai and K.Y. Lin	Advances in Engineering Software	2010	Vol. 41, No. 2, pp. 388-400
Semi-Automatic Feature Point Extraction Using One Seed Point	S. H. Hsu and J.Y. Lai	International Journal of Advanced Manufacturing Technology	2010	Vol. 51, No. 1-4, pp. 277-295
An Applying Study of Different Design Criterions of the Customer-Made Partially Resurfacing Prosthesis in Partial Replacement	2. S.C. Lin, J.Y. Lai, K.J. Chen and W.T. Wang	Chinese Journal of Joint Surgery	2010	accepted
Simultaneous Segmentation of Bone Regions Using Multiple-Level Threshold	C.Y. Huang, P.Y. Lee, J.Y. Lai, L.J. Luo, Y.C. Tsai and S.C. Lin	Computer-Aided Design and Application	2011	Vol. 8, No. 2, pp. 269-288.

研究計畫 Research Projects

工作類別	姓名	計畫名稱	執行期限	補助單位	金額
主持人	賴景義	塑膠射出成型薄殼件特徵辨識、分離與規則化網格自動建構技術發展	2017-08-01 ~ 2019-07-31	科技部	1522000
主持人	賴景義,鍾禎元,廖昭仰,李佩淵	骨創傷手術計劃雲端運算之醫學影像模擬與積層製造技術發展(3)	2017-11-01 ~ 2018-10-31	科技部	5342000
共同主持人	賴景義	雷射積層製造金屬射出成形(MIM)異形水路模具及其鐵基金屬玻璃粉體開發	2017-09-01 ~ 2018-07-31	科技部	7486000
主持人	賴景義	以二維影像進行三維任意視角影像顯示之技術發展	2017-03-01 ~ 2018-02-28	萬里科技	590000
主持人	賴景義	電腦輔助設計軟體開發工程師人才培育計畫-模流分析應用之特徵辨識技術發展(V)	2017-01-01 ~ 2017-12-31	科盛科技	657800
主持人	賴景義,鍾禎元,廖昭仰,李佩淵	骨創傷手術計劃雲端運算之醫學影像模擬與積層製造技術發展(2)	2016-11-01 ~ 2017-10-31	科技部	5607000
共同主持人	廖昭仰,賴景義,李朱育	以二維影像進行三維網格建模之技術開發(III)	2016-03-01 ~ 2017-02-28	萬里科技	1070000
主持人	賴景義	電腦輔助設計軟體開發工程師人才培育計畫-模流分析應用之特徵辨識技術發展(VI)	2016-01-01 ~ 2016-12-31	科盛科技	657800
主持人	賴景義,鍾禎元,廖昭仰,李佩淵	骨創傷手術計劃雲端運算之醫學影像模擬與積層製造技術發展(1)	2015-11-01 ~ 2016-10-31	科技部	5361000
共同主持人	廖昭仰,賴景義,李朱育	以二維影像進行三維網格建模之技術開發	2015-03-01 ~ 2016-02-29	萬里科技	1070000
主持人	賴景義	電腦輔助設計軟體開發工程師人才培育計畫-模流分析應用之特徵辨識技術發展(III)	2015-01-01 ~ 2015-12-31	科盛科技	646800
主持人	賴景義,陳奇夆,沈志雄	微型光學元件智慧製造系統與檢測技術開發-微型光學元件智慧製造系統與檢測技術開發	2013-08-01 ~ 2015-07-31	國家科學委員會	7392000
主持人	賴景義	百塑委託中央大學I-CAM共同開發計畫書	2015-01-01 ~ 2015-06-30	百塑科技	304700
主持人	賴景義	模流分析應用之孔洞與混接面特徵辨識技術發展	2015-04-22 ~ 2015-04-22	科技部	750000
共同主持人	廖昭仰,賴景義,李朱育	以二維影像進行三維網格建模之技術開發	2014-03-01 ~ 2015-02-28	萬里科技	1070000
主持人	賴景義	電腦輔助設計軟體開發工程師人才培計畫-模流分析用之特微辨識技術發展	2014-01-01 ~ 2014-12-31	科盛科技	646800
主持人	賴景義	射出成型產品CAD轉CAM委託開發計畫	2014-02-01 ~ 2014-08-31	百塑企業股份有限公司	275000
主持人	賴景義,賴尚宏,朱宏國,林惠勇,王民良,劉楷哲,李佩淵	整合擴增實境與三維醫學影像之脊椎術前評估與術中導航系統發展-總計畫兼子計畫二:脊椎手術CT影像組織分離與術前評估系統發展(II)	2012-08-01 ~ 2014-07-31	國家科學委員會	3647000
主持人	賴景義,侯咸仰	長骨骨折術前評估系統臨床測試與改良	2013-01-01 ~ 2013-12-31	壢新醫院	192000
主持人	賴景義,侯咸仰	長骨骨折術前評估系統臨床測試與改良	2013-01-01 ~ 2013-12-31	教育部	483000
主持人	賴景義	電腦輔助設計軟體開發工程師人才培育計畫	2013-01-01 ~ 2013-12-31	科盛科技	500000
主持人	賴景義、黃以玫	電腦輔助工程分析相關應用與開發	2010-06-01 ~ 2013-05-31	虎門科技股份有限公司	383900
主持人	賴景義,侯咸仰	長骨骨折手術之術前評估系統發展	2012-04-01 ~ 2012-12-31	教育部	155000
主持人	賴景義、侯咸仰	長骨骨折手術之術前評估系統發展	2012-01-01 ~ 2012-12-31	壢新醫院	345000
主持人	賴景義	整合擴增實境與三維醫學影像之脊椎術前評估與術中導引系統發展－子計畫二:脊椎手術CT影像組織分離與術前	2011-08-01 ~ 2012-07-31	國家科學委員會	678000
主持人	賴景義,賴尚宏,李潤容,劉楷哲,李佩淵	總計畫:整合擴增實境與三維醫學影像之脊椎術前評估與術中導引系統發展－整合擴增實境與三維醫學影像之脊椎術前評估與術中導引系統發展	2011-08-01 ~ 2012-07-31	國家科學委員會	517000
主持人	賴景義	一種應用於非規則造形特徵擷取之疊代式分群技術發展	2011-08-01 ~ 2012-07-31	國家科學委員會	752000
共同主持人	李佩淵,賴景義,黃華思	骨盆手術之術前評估系統發展	2010-08-01 ~ 2011-07-30	秀傳紀念醫院院內研究計劃	285000
共同主持人	李佩淵,賴景義,黃華思	由電腦斷層影像快速產生骨盆實物模型之技術發展	2010-08-01 ~ 2011-07-30	秀傳紀念醫院院內研究計劃	298000
共同主持人	李佩淵,賴景義	醫療用虛擬實境人機介面發展	2010-08-01 ~ 2011-07-30	秀傳紀念醫院院內研究計劃	298000
共同主持人	李佩淵,賴景義,黃華思	骨盆骨折手術決策輔助系統	2010-08-01 ~ 2011-07-30	秀傳紀念醫院院內研究計劃	295000
共同主持人	李佩淵,賴景義	骨盆手術之術前評估系統發展	2010-08-01 ~ 2011-07-30	NSC 99-2221-E-442-001	516000
共同主持人	翁文德, 賴景義	發展人工膝關節定位技術與仿軟骨塑膠墊片磨耗評估系統(II)	2010-08-01 ~ 2011-07-30	NSC99-2221-E-236-003	616000
主持人	林上智,賴景義,鮑卓倫,陳世豪,蔡文基	高風險性之脊椎微創手術的影像數位整合教育訓練平台	2010-08-01 ~ 2011-07-30	國科會補助「醫療器材跨部會發展方案」研究計劃	4500000(子計畫1500000)
主持人	賴景義	逆向工程中自動化曲面重建技術發展	2009-08-01 ~ 2011-07-30	NSC 98-2221-E-008-082-MY2	1483000
共同主持人	翁文德, 賴景義	發展人工膝關節定位技術與仿軟骨塑膠墊片磨耗評估系統	2009-08-01 ~ 2010-07-31	NSC 98-2221-E-236-003	562000
共同主持人	鄭良珊,鐘從德,賴景義,李佩淵	由電腦斷層影像資料重建下顎骨三維模型之研究	2009-08-01 ~ 2010-07-31	秀傳紀念醫院院內研究計劃	272000
主持人	賴景義	矽晶太陽能電池製程中雙層網印電極之線上檢測及補正系統開發	2009-05-01 ~ 2010-04-30	科學工業園區固本精進研究計畫	2500000
主持人	賴景義,張文瑞	快速顱骨修補植入物設計系統開發(II)	2009-01-01 ~ 2009-12-31	亞東紀念醫院院內研究計畫	363000
主持人	賴景義	製鞋專用逆向工程技術發展	2007-08-01 ~ 2009-07-31	NSC-96-2221-E-008-100-MY2	1435000
主持人	賴景義、張文瑞	快速顱骨修補植入物設計系統開發	2008-01-01 ~ 2008-12-31	亞東紀念醫院院內研究計畫	254000
主持人	賴景義	客製化模流資料庫研究	2021-01-01 ~ 2021-12-31	新鉅科技	340,000
主持人	賴景義	電腦輔助設計軟體開發工程師人才培育計畫-模流分析應用之特徵辨識技術發展(IX)	2021-01-01 ~ 2021-12-31	科盛科技	720,000
主持人	賴景義	模流分析之射出成型模具特徵優化與孔洞簡化技術發展	2019-08-01 ~ 2021-07-31	科技部	1,400,000
共同主持人	4. 何正榮, 鍾志昂, 鍾禎元, 賴景義, 林志光, 李朱育, 鄭憲清	雷射積層製造金屬射出成型異形水路模具及其鐵基金屬玻璃粉體開發(IV)	2020-08-01 ~ 2021-07-31	科技部
主持人	賴景義	電腦輔助設計軟體開發工程師人才培育計畫-模流分析應用之特徵辨識技術發展(VIII)	2020-01-01 ~ 2020-12-31	科盛科技	657,800
主持人	賴景義, 鍾禎元	光學鏡頭零件模流分析與射出成型製程技術研究暨人才培育計畫(三)	2021-01-01 ~ 2020-12-31	新鉅科技	550,000
共同主持人	何正榮, 鍾志昂, 鍾禎元, 賴景義, 林志光, 李朱育, 鄭憲清	雷射積層製造金屬射出成型異形水路模具及其鐵基金屬玻璃粉體開發(3/3)	2019-08-01 ~ 2020-07-31	科技部
主持人	賴景義	電腦輔助設計軟體開發工程師人才培育計畫-模流分析應用之特徵辨識技術發展(VII)	2019-01-01 ~ 2019-12-31	科盛科技	657,800
主持人	賴景義, 鍾禎元, 李朱育	光學鏡頭零件模流分析與射出成型製程技術研究暨人才培育計畫(二)	2019-01-01 ~ 2019-12-31	新鉅科技	550,000
主持人	賴景義,鍾禎元	整合模流分析與金屬積層製造之MIM零件異型水路模具開發	2019-06-01 ~ 2020-05-31	科技部小產學計畫/文生真空	670,000
主持人	賴景義	模流分析之射出成型模具特徵優化與孔洞簡化技術發展	2019-08-01 ~ 2021-07-31	MOST 108-2221-E-008-068-MY2	2,124,000
主持人	賴景義	全電式射出成型機於MIM射出成型之應用探討	2019-05-01 ~ 2020-04-30	台達電子	548,000
共同主持人	何正榮, 鍾志昂, 鍾禎元, 賴景義, 林志光, 李朱育, 鄭憲清	雷射積層製造金屬射出成型異形水路模具及其鐵基金屬玻璃粉體開發(2/3)	2018-08-01 ~ 2019-07-31	MOST 106-3114-E-008-004
主持人	賴景義	機械手臂加工航太工模具技術研究	2018-03-031 ~ 2018-11-30	欣鴻陽模具	490,000

榮譽事蹟 Honors and Awards

名稱	年度及說明
中央大學傑出研究獎	2019
中央大學傑出服務獎	2016
工學院研究優良教師	2009
中央大學傑出研究獎	2009
中央大學傑出研究獎	2006
國科會甲種研究獎九次	1990-2003

專利 Patents

類別	專利申請案件名稱	國別	發明人	提申案號/證書號/權利期間
發明專利	二維轉子齒形定位與間隙分析方法	中華民國	賴景義, 黃詣超, 林豐詠, 郭以理	I325037 公告日期：2010/05/21
發明專利	航太葉片六點座標疊代量測定位法	中華民國	賴景義, 徐道賢, 翁文德	I265275 公告日期: 2006/11/1
發明專利	以多點疊代之三次元座標定位方法	中華民國	陳國仁, 林義欽, 賴景義, 翁文德	I249020 公告日期: 2006/02/11

賴景義 Lai, Jiing-Yih

論文著作 Publications

研究計畫 Research Projects

榮譽事蹟 Honors and Awards

專利 Patents

國立中央大學機械工程學系