Faculty
Lee, Sheng-Long
Professor & Director of Institute of Materials
Contact Information
Office：E2-303
Tel：034267325, 0910143057
Campus Extension：34325,58057
Fax：03-4254501
E-mail：shenglon@cc.ncu.edu.tw
Expertise Introduction
高強度航太輕金屬合金（Al,Mg,Ti）研究(Light Weight Metal Alloys(Al,Mg,Ti）)
儲氫材料研究(Energy StorageHydrogen Storage Materials)
材料科學(Material Science)
材料工程(Material Engineering)
材料分析(Material analysis)
Hwang, Jiun-Ren
Professor
Contact Information
Office：E4-266
Tel：03-4267314
Campus Extension：34314
Fax：03-4254501
E-mail：jrhwang@ncu.edu.tw
Expertise Introduction
- 疲勞與破壞 (Fatigue and Fracture)
- 複合材料 (Composite Materials)
- 結構耐久評估 (Structural Durability Analysis)
- 車輛工程 (Vehicle Engineering)
Jason Shian-Ching Jang
Profeesor
Contact Information
Office：E6-B128
Tel：03-4227151
Campus Extension：34910
Fax：03-4254501
E-mail：jscjang@ncu.edu.tw
Expertise Introduction
高韌性塊狀金屬玻璃和複材之合金設計及開發
塊狀金屬玻璃粘性流體及其超塑性精密成形性探討
鋯基及銅基金屬玻璃鍍模之抗菌性質研究
鈦基金屬玻璃在生醫器械及多孔植入材之應用研究
積層至造用金屬玻璃粉體合金設計及開發奈
低密度高熵合金設計及開發
高溫介金屬合金研發
真空精密鑄造技術
Vacuum metallurgy and rapidly solidification technology are dedicated to the research and development of novel functional alloys bearing special mechanical and biomedical properties. Our interests are focused on the following subjects:
Alloy design of high performance alloys, bulk metallic glass and composites, intermetallics, and light-weight high entropy alloys.
Thermoplastic precision forming of bulk metallic glass
Metallic glass coating for the application of anti-bacteria, medical tool, and fatigue resistance
Synthesis of metallic glass powders for application on additive manufacturing.
Ho, Jeng-Rong
Profeesor
Contact Information
Office：E4-267
Tel：03-4267309
Campus Extension：34309
Fax：03-4254501
E-mail：jrho@ncu.edu.tw
Expertise Introduction
熱傳流體力學; 熱流計算數值模型; 雷射精密製程與材料處理; 薄膜製程與圖案技術; 有機軟性電子與光電元件製程: 薄膜電晶體 (OTFTs)、太陽能電池 (OPVs)、發光二極體 (OLEDs &PLEDs)
Transport Phenomena of Heat and Fluids; Computational Modeling of Heat Transfer and Fluid Dynamics; Laser Machining, Fabrication, and Material Processing; Thin Film Fabrication and Patterning Technologies; Fabrication of Flexible Electronics and Opto-electronics (OTFTs, OPVs, OLEDs and PLEDs)
Fuh, Yiin-Kuen
Profeesor
Contact Information
Office：E4-268
Tel：03-4267305
Campus Extension：34305
Fax：03-4254501
E-mail：mikefuh@ncu.edu.tw
Expertise Introduction
- 適應性光學系統應用 (Adaptive optics and applications in opto-mechatronics systems)
- 近場電紡織技術製備微奈米纖維及奈米流道、可撓透明電極 (Near-field electrospinning and applications in nanogenerators,nanofluidics, transparentflexible electrodes and biocompatibleguided matrix, etc.)
- 微機電製程及設計 (MEMS, RF MEMS)
- 壓電材料及元件設計 (Piezoelectrics materials and devices development)
- 冷凍空調及消防工程 (HVAC and fire equipment codes in Taiwan, licensed Taiwan professional engineer in both fields)
- 金屬成型 (Metal forming, esp. precision forging processes (cold,warm & hot), hydroforming, superplastic forming etc.)
Tsao, Chia-Wen
Professor
Contact Information
Office：E4-366
Tel：03-4267343
Campus Extension：34343
Fax：03-4254501
E-mail：cwtsao@ncu.edu.tw
Expertise Introduction
微流體 、質譜分析技術、納米系質譜分析技術、 微流體生物反應器設計、微奈米製造、 微奈米技術、塑膠微加工技術、生物晶片、生物感測技術、微流體強化石油開採技術、微機電系統
Microfluidics、Mass Spectrometry、Nanostructured silicon mass spectrometry analysis、Microfluidic bioreactors design、Micro Nano Technology、Polymer Microfabrication、Lab-on-a-chip、Biosensor、Micorfluidic model oil enhanced oil recovery、Microelectricalmechanical systems (MEMS)
Lee, Tien-Hsi
Professor
Contact Information
Office：E4-363
Tel：03-4267302
Campus Extension：34302
Fax：03-4254501
E-mail：benlee@ncu.edu.tw
Expertise Introduction
1〉5G Core Materials
＊奈米級絕緣層矽晶圓量產技術 (Manufacturing Technology of Nanoscale Silicon on Insulator Wafer)
＊碳化矽晶圓快速薄化技術 (Rapid Thinning of Silicon Carbide Wafer)
2〉Energy and Photonics Material Processing
＊多孔矽基光電能源材料 (Porous Silicon-Based Optoelectronics Energy Materials)
＊奈米級原子接觸電化學科學及應用 (Nanoscale Electrochemistry Science and Applications in Atomic Contact)
＊奈米單晶薄膜轉移科學與技術 (Nanoscale Single-Crystal Layer Transfer Science and Technology)
3〉Advanced Manufacturing Technology
＊超低溫晶圓鍵合科學與技術 (Ultra-low Temperature Wafer Bonding Science and Technology)
＊ 綠色環保化學機械拋光技術 (Green Chemical Mechanical Polishing Technology)
Emerging Research Topics
＊半導體材料固相快速蝕刻製程（Rapid Solid-Etching Process for Semiconductor Materials; 創新題材)
＊奈米超材料 (Nanoscale-Metamaterials; 2022-2023 啟動研究題材)
Su, Ching-Yuan
Professor
Contact Information
Office：E5- B126
Tel：03-4227151#34911
Campus Extension：34911
Fax：03-4254501
E-mail：cysu@ncu.edu.tw
My Researcher Profile：https://publons.com/researcher/1302528/ching-yuan-su/
Laboratory Website：奈米元件與能源材料實驗室
Expertise Introduction
(1) 低維度奈米材料與能源材料之合成與分析(石墨烯及2D半導體材料)
(2) 電漿輔助製程, 化學氣相沉積製程
(3) 石墨烯於軟性電子、生醫感測、光電元件之應用
(4) 新能源材料於導熱複合材料、儲能元件(電池與超電容)、新穎觸媒於能源轉換、抗腐蝕保護
(1)Nanomaterials ( Graphene and 2D materials).
(2)Graphene-based applications in nano-electronics, energy conservation, and energy storage
(3)Chemical Vapor Deposition, Plasma-assistant CVD
(4)Flexible electronics, Optical electronics, Advanced energy materials for battery, supercapacitors, novel catalyst, and anti-corrosion
Hung, Jung-Chou
Professor
Contact Information
Office：E4-464
Tel：03-4227151
Campus Extension：34351
Fax：03-4254501
E-mail：hungjc@ncu.edu.tw
Expertise Introduction
精密電化學加工、拋光、去毛邊 Electrochemical machining (ECM), Polishing, Deburring.
精密放電加工、超音波加工 Electrical discharge machining (EDM), Ultrasonic machining (USM).
微結構加工、陣列特徵加工 Micromachining, Array and Batch processing.
模具設計、多重物理模擬分析 Mold design, Multiple physical simulation analysis for ECM.
金屬表面處理、絕緣材料研發 Metal surface treatment, R. and D. of insulating materials.
超合金、非導體硬脆材料加工 Superalloy machining. Non-conductor hard and brittle material processing.
電腦整合智慧製造 Computer integrated intelligent manufacturing.
Chan, Chia-Hua
Associate Professor
Contact Information
Office：E2-314
Tel：03-4267360
Campus Extension)：34360
Fax：03-4254501
E-mail：chiahuac@ncu.edu.tw
Expertise Introduction
1. 奈米材料設計與合成
2. 奈米小球及結構於光電領域之應用
3. LED奈米粗化結構設計
4. 有機發光二極體結構設計
5. 鈣鈦礦系材料研發與應用
1. Material design and synthesis
2. QD, LEDs and Solar cell
Chung, Chen-Yuan
Associate Professor
Contact Information
Office：E2-412
Tel：03-4267331
Campus Extension：34331
Fax：03-4254501
E-mail：cychung@ncu.edu.tw
Expertise Introduction
肌骨生物力學(Musculoskeletal biomechanics)、CAE二次開發(Secondary development of CAE)、射出成型(Injection molding)
Hai-Ping Hsui
Associate Professor
Contact Information
Office：E4-467
Tel：03-4267337
Campus Extension：34337
Fax：03-4254501
E-mail：benno@ncu.edu.tw
Expertise Introduction
放電加工(Electrical Discharge Machining)
電化學加工(Electrochemical Machining)
精密製造(Precision Manufacturing)
電腦整合製造(Computer integrated manufacturing)
風能測試驗證技術(Wind Energy Testing and Certification Technology)
Lin, Chin-Te
Assistant Professor
Contact Information
Office：E4-253
Tel：03-4267379
Campus Extension：34379
Fax：03-4254501
E-mail：chintelin@ncu.edu.tw
Expertise Introduction
物聯網製造(IoT-based manufacturing)*
訊號處理(Digital Signal Process)*
軟體工程(Software Engineering)*
最佳設計(Numerical Optimization)
專利工程(Patent Engineering)
有限元素分析(Finite Element Analysis)
電腦輔助設計(Computer-aided Design)
DEPARTMENT OF MECHANICAL ENGINEERING, NATIONAL CENTRAL UNIVERSITY
TEL : 886-3-4267300
FAX：886-3-4254501
EMAIL : NCU4300@NCU.EDU.TW
ADD : No. 300, Zhongda Rd., Zhongli District, Taoyuan City 32001, Taiwan (R.O.C.)
Privacy Policy Statement